Products and Services

Casing Running Services

Offshore Energy Services (OES) has established itself as a leading provider of Casing Handling and Installation Services to Oil and Gas Exploration Companies. We offer our Clients some of the most innovative equipment in the industry ranging from Flush Mount Spiders, Deepwater Specialty Tools, Casing Running Tools and the OES designed Track Tong Systems.

OES maintains the highest level of quality, training, testing and maintenance of our equipment and promotes a safe efficient work environment. Upholding these OES standards, our Casing Division is the backbone of our business and is a principal factor setting OES apart from its competitors.

Tubing Running Services

Offshore Energy Services (OES) Tubing Division, which serves the Gulf Coast, is located in Houma, Louisiana on the Munson slip just off the Intracoastal waterway.

This division of OES was started in 1997 and has established itself as a leader in make-up and handling of chrome and carbon steel completions / de-completions as well as drill pipe and dual strings.

Keeping with modern technology of higher production and downhole designs, OES has developed Flush Mounted Spiders (FMS) with high emphasis in the design for control line protection, management and increased running times by eliminating insert changes on tapered strings.

OES Tubing personnel and support staff have the training and expertise to successfully install tubing and run drill pipe of various sizes in deepwater and shelf Gulf of Mexico as well as inland and land operations.

Drive Hammers

Over 40 years ago, Offshore Energy Services (OES) began offering Drive Hammer services to the Oil and Gas industry across the U.S. Gulf Coast region, both land and offshore.

In 1976, OES began with the utilization of the Delmag Diesel Hammer and, the already extensive inventory, was updated in 2000 with the addition of the IHC Hydraulic Hammers. Over the span of 4+ decades, OES has established itself as an industry leader and is widely recognized throughout the region and beyond.

Our Drive Hammer Department also provides a vast quantity of drive hammer accessories: Drive-pipe Whipstocks and Conductor products including our innovative rapid penetration Hydrating Drive Shoe (Patented 8,191,650). These additional services/products coupled with our highly-trained personnel and our commitment to safety has made OES one of the premier providers of Drive Hammer services.

Specialty Mud Tools

Offshore Energy Services (OES) has been a leading provider of Casing handling and installation services to oil and gas exploration companies since 1976. OES offers some of the most innovative equipment in the industry. Our AutoFill Casing Fill-Up & Circulating System and our patented Drill Pipe Circulation & Flow-Back Tool (CFT) are no exception.

Laydown Services

Typically, handling tubulars is one of the most hazardous operations in the drilling process. Rather than conventional methods utilizing the mouse hole, v-door, and air hoist, while staging personnel close to the operation, our hydraulically operated trough type machine carries tubulars to and from the rig floor allowing personnel to keep a safe buffer zone between them and the operation.

Utilizing our Laydown Units will save time (typically 1/3 quicker than conventional methods) which equates to a dollar savings for the operator. Our machines can easily handle 1,500 plus feet per hour.

By using a trough to carry the pipe, the trough moves – not the pipe. Delicate production strings are handled with a polyurethane coated trough, virtually eliminating all contact with metal during the handling operation resulting in less wear and damage to tubulars.

Tubular Products

Located on Hwy. 90 East in Broussard, Louisiana, Offshore Energy Services (OES) headquarters is equipped with a Pipe Fabrication Shop including a 15 acres pipe yard. We specialize in fabrication and painting of caissons and conductors for onshore and offshore locations. Our inventory includes, but is not limited to, drive pipe in 14” OD through to 72” OD, wall thicknesses from .375” to 2.5” and grades API 5LB through to X grades.

OES has the capability of fabricating truckable items as listed below:

• Pipe preparation (bevels, padeyes, etc.)
• Pipe connectors (weld-on capabilities)
• Navigational aids
• Templates
• Shipping Skids & Baskets
• Drive pipe
• 15,000 square feet of covered fabrication area

Assembly & Test Facility

Established in 2002, Offshore Energy Services (OES) Assembly Division, located in Houma, Louisiana, has become a frontrunner in the handling of assembly make-up, pressure testing, covered storage, inventory management, R&D Derrick Facility, and assisting in well coordinating for major deep-water completion projects.

Equipped with a 48” OD X 70’ L Test Chamber, 32,000 cubic ft. of enclosed storage facility, Torque Turn Services, and a 141’6 Vertical Make-up (Derrick), the OES Houma office can accommodate our clients with additional services to complement their tubular handling requirements.

In 2003, Offshore Energy Services (OES) entered into a joint venture with V&M Tube Alloy which couples Premium Threading/Tubular Accessories capability with OES’s Torqueing Services thus providing Turnkey Solutions to the client’s exact needs.

All manufacturing, make-up, testing and loading is coordinated from one facility and then shipped directly to location. This approach from a centralized facility simplifies logistics, time savings and expenses normally associated with separate services which results in faster and more cost effective delivery.

Associated Services

Self-contained portable unit designed to make and break drill stem connections at the well site.

Utilization of the Torque Pro creates a significant rig time savings by employing an offline system for drill string connections that would otherwise be a time consuming process on the rig floor.

• Fixed headstock chuck with 3 ½" to 12" diameter capacity
• Traveling tailstock chuck with 3 ½" to 12" diameter capacity
• No jaws or inserts to change for different work piece diameters
• Self centering, cylinders extend evenly
• 115,000 Ft./Lbs. make/break force on free standing skid base
• Standard tong dies assures easy replacement
• Designed to work with a 3,000-PSI hydraulic pressure
• Open head and tailstock design allows vertical access for long components